Quantcast CLEARANCE AND MARKER LIGHT INSTALLATION (LED Clearance Model) - Continued - TM-9-2330-394-13-P0643

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
CLEARANCE AND MARKER LIGHT ASSEMBLIES
0050 00
REPLACEMENT - Continued
CLEARANCE AND MARKER LIGHT REMOVAL (LED Marker Model)
NOTE
Remove plastic cable ties as required.
All clearance and marker lights are removed the same way. Right marker light shown.
Clearance and marker connectors are:
Right front clearance connector ................
J250:TL262
J251:TL263
Left front clearance connector...................
J255:TL267
Right rear clearance connector .................
J256:TL268
Left rear clearance connector....................
Left marker light ......................................
J252:TL264
Center marker light ..................................
J253:TL265
Right marker light ....................................
J254:TL266
1.
Remove two screws (1) and lamp (2) from base (3).
2.
Remove four self-locking nuts (4), washers (5) screws (6) and base (3) from trailer. Discard
self-locking nut.
0050 00-13


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.