ANTI-LOCK BRAKING SYSTEM (ABS) WHEEL SPEED SENSOR
REPLACEMENT - Continued
One ABS wheel speed sensor is located behind each wheel. The MTVT is equipped with
four ABS wheel speed sensors, and the LMTVT has two. All ABS wheel speed sensors
are installed the same way. The MTVT right side shown.
Install ABS wheel speed sensor (3) in wheel hub (4).
Install plastic cable ties as required.
Control sensor harness connectors correspond to the following ABS wheel speed sensor
Right side, rear: J255
Left side, rear: J256
Right side, front: J250 (MTVT only)
Left side, front: J251 (MTVT only)
Connect ABS wheel speed sensor lead (1) to control sensor harness connector (2).