BRAKE SHOE REPLACEMENT/ADJUSTMENT - Continued
INSTALLATION - Continued
Do not rely on automatic adjusters to take up excessive initial clearance.
Tightening adjusting screws against plunger housings may result in failure of
automatic adjusters to function properly. Failure to comply may result in
serious injury or death to personnel.
Brake shoe ends stamped ADJUSTER are positioned on adjusting screws. Failure to
comply may result in damage to equipment.
Loosen two adjusting screws (6) 1/2 turn or until slots are aligned with brake shoes (4).
Install two brake shoes (4) in holddown clips (5) with ends seated in slots in adjusting screws (6)
and anchor plungers (9).
Install two return springs (3) on brake shoes (4).