Custom Search
|
|
|
||
 TM 9-2330-394-13&P
BRAKE PLUNGER ASSEMBLY REPLACEMENT/REPAIR - Continued
0056 00
CLEANING/INSPECTION
WARNING
Dry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective
goggles and gloves; use only in well-ventilated area; avoid contact with skin,
eyes, and clothes, and do not breath vapors. Keep away from heat or flame.
Never smoke when using Dry Cleaning Solvent; the flashpoint for Type I Dry
Cleaning Solvent is 100 F (38 C) and for Type II is 138 F (50 C). Failure to
comply may result in serious injury or death to personnel.
If personnel become dizzy while using Dry Cleaning Solvent, immediately get
fresh air and medical help. If Dry Cleaning Solvent contacts skin or clothes,
flush with cold water. If Dry Cleaning Solvent contacts eyes, immediately flush
eyes with water and get medical attention. Failure to comply may result in
serious injury or death to personnel.
1.
Clean all metal parts thoroughly with Dry Cleaning Solvent.
NOTE
If plungers, sleeves, screws, springs, or pawls do not pass inspection, replace adjusting
plunger assembly as a unit.
2.
Inspect adjusting plunger (12), adjusting sleeve (11), and adjusting screw (13) for damage.
3.
Inspect screw (15), spring (16), and adjusting pawl (17) for damage.
0056 00-5
|
||
|
||
