Quantcast ASSEMBLY - TM-9-2330-394-13-P0733

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
BRAKE PLUNGER ASSEMBLY REPLACEMENT/REPAIR - Continued
0056 00
ASSEMBLY - Continued
3.
Apply grease to inside surface of seal (14).
4.
Position and seat seal (14) on adjusting screw (13).
5.
Install adjusting screw (13) in adjusting sleeve (11) until snug. Back off 1/4 turn.
6.
Apply film of grease on adjusting sleeve (11).
CAUTION
Ensure adjusting sleeve is installed in adjusting plunger with large shouldered end up.
Failure to comply will cause self-adjusting feature not to function.
7.
Position adjusting sleeve (11) in adjusting plunger (12).
8.
Apply film of grease on adjusting plunger (12).
0056 00-7


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.