TM 9-2330-394-13&P
ANTI-LOCK BRAKING SYSTEM (ABS) CONTROL POWER
0068 00
HARNESS REPLACEMENT - Continued
INSTALLATION - Continued
NOTE
Perform steps (5) through (7) on MTVT.
5.
Position four clamps (22) on electrical cable assembly (23) and ABS control power harness (12).
6.
Position clamps (22) on right frame rail (24) with four screws (21) and self-locking nuts (20).
Tighten four self-locking nuts (20) to 60-72 lb-in (7-9 Nm).
7.
0068 00-11