Custom Search
|
|
|
||
 TM 9-2330-394-13&P
WHEEL BEARING/HUB SEAL REPLACEMENT - Continued
0080 00
INSTALLATION - Continued
19. Position locking tang washer (7) and outer wheel bearing nut (6) on spindle (12).
NOTE
Position outer wheel bearing nut so that one of the two screw holes at the top of the tab
lockwasher is visible to the left of a knuckle on the outer wheel bearing nut.
20. Tighten outer wheel bearing nut (6) to 300-400 lb-ft (407-542 Nm).
0080 00-12
|
||
|
||
