LANDING GEAR AND WINCH REPLACEMENT/REPAIR - Continued
LANDING GEAR INSTALLATION
Landing gear weighs approximately 80 lbs (36 kgs). Attach a suitable
lifting device prior to installation. Failure to comply may result in injury to
personnel or damage to equipment.
Left and right sides of landing gear are installed the same way. Left side shown.
Position landing gear (11) and mount (17) on trailer with three bolts (16) and self-locking nuts
Tighten three self-locking nuts (15) to 190-240 lb-ft (255-325 Nm).
Perform steps (1) and (2) on right side of trailer.