Quantcast INSTALLATION, LMTVT - TM-9-2330-394-13-P1212

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
SHOCK MOUNTING PLATE REPLACEMENT - Continued
0106 00
INSTALLATION, LMTVT
NOTE
Left and right side shock mounting plates are installed the same way. Left side shown.
1.
Position shock mounting plate (8) on axle (9) with two U-bolts (7), four washers (6), and self-
locking nuts (5).
Tighten four self-locking nuts (5) to 200 lb-ft (271 Nm).
2.
Retighten four self-locking nuts (5) in increments of 50 lb-ft (67 Nm) to 390-510 lb-ft (530-690
3.
Nm) in sequence shown.
OPERATIONAL CHECK
Install shock absorbers (WP 0075 00, Installation).
END OF WORK PACKAGE
0106 00-4


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.