Quantcast REAR SHOCK MOUNT CROSSMEMBER REMOVAL, MTVT

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
SHOCK MOUNT CROSSMEMBER REPLACEMENT - Continued
0107 00
REAR SHOCK MOUNT CROSSMEMBER REMOVAL, MTVT - Continued
CAUTION
When removing bolts, continuous removal of collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
NOTE
Left and right sides of rear shock mount crossmember are removed the same way. Right
side shown.
Steps (1) and (2) require the aid of an assistant.
1.
Remove four collars (20) and bolts (21) from rear lifting beam (22). Discard collars and bolts.
2.
Remove seven collars (23) and bolts (24) from rear lifting beam (22). Discard collars and bolts.
0107 00-7


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.