Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
SHOCK MOUNT CROSSMEMBER REPLACEMENT - Continued
0107 00
INSTALLATION, LMTVT
NOTE
Left and right sides of shock mount crossmember are installed the same way. Right side
shown.
Steps (1) through (4) require the aid of an assistant.
1.
Position shock mount crossmember (95) on frame rails (92) with two bolts (98) and self-locking nuts
(99).
2.
Position bolt (100) and self-locking nut (101) on shock mount crossmember (95).
Tighten self-locking nuts (99 and 101) to 210-225 lb-ft (285-305 Nm).
3.
4.
Perform steps (1 through 3) on left side of shock mount crossmember.
0107 00-30


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business