Quantcast INSTALLATION - Continued - TM-9-2330-394-13-P1293

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
REAR BUMPER REPLACEMENT - Continued
0114 00
INSTALLATION - Continued
4.
Position splash guard (6) on rear bumper (7) with two screws (4 and 5), resilient mounts (3),
washers (2), and nuts (1).
Tighten two nuts (1) to 18-22 lb-ft (24-30 Nm).
5.
6.
Perform step (1), step (2) or step (3), and steps (4) and (5) on left side of rear bumper.
OPERATIONAL CHECK
1.
Install rear crossmember (WP 0108 00, Installation).
END OF WORK PACKAGE
0114 00-5/6 Blank


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.