AXLE BOGIE (MTVT) REPAIR - Continued
Dry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective
goggles and gloves; use only in well-ventilated area; avoid contact with skin,
eyes, and clothes, and do not breath vapors. Keep away from heat or flame.
Never smoke when using Dry Cleaning Solvent; the flashpoint for Type I Dry
Cleaning Solvent is 100 F (38 C) and for Type II is 138 F (50 C). Failure to
comply may result in serious injury or death to personnel.
If personnel become dizzy while using Dry Cleaning Solvent, immediately get
fresh air and medical help. If Dry Cleaning Solvent contacts skin or clothes,
flush with cold water. If Dry Cleaning Solvent contacts eyes, immediately flush
eyes with water and get medical attention. Failure to comply may result in
serious injury or death to personnel.
Clean all metal parts with Dry Cleaning Solvent.
Replace any part that fails to pass visual inspection.
Inspect all metal parts for pitting, corrosion, or signs of wear.