Custom Search
|
|
|
||
 TM 9-2330-394-13&P
ILLUSTRATED LIST OF MANUFACTURED ITEMS - Continued
0179 00
MANUFACTURED ITEMS - Continued
Figure 3. Cable Assembly
a.
All dimensions are in inches (centimeters).
b.
Make from bulk cable and flat steel material as identified in parts list.
c.
Drill two 0.19 in. (.48 cm) diameter holes through tab material as shown on Figure 3. Cable
Assembly.
d.
De-burr and remove sharp edges.
e.
Bend tab as shown on Figure 3. Cable Assembly.
f.
Form loops on cable ends and insert sleeve material over cable on one end of cable and over cable and
through sleeve at other end of cable as shown in Figure 3. Cable Assembly.
g.
Crimp two sleeves over cable ends.
0179 00-6
|
||
|
||
