TM 9-2330-398-10
2-3. VALVES, PIPING, AND DISPENSING COMPONENTS (continued).
KEY
COMPONENT
DESCRIPTION
1
Front Hose Reel
Stores and rewinds front 1 1/4-inch hose.
2
Meter Outlet Nipple
Connects meter to hose reel.
3
Front Meter
Records amount of fuel being dispensed through
front hose.
4
Meter Reset Knob
Pushed in and turned clockwise to reset meter.
5
Rear Meter
Records amount of fuel being dispensed through
rear hose.
6
Meter Reset Knob
Pushed in and turned clockwise to reset meter.
7
Valve R
Permits fuel flow through the rear hose reel. (Valve is
open when handle is parallel to pipe).
8
Hose Reel Rewind Crank
Used to manually rewind hose reels. (Turn clockwise
for left hose reel; turn counterclockwise for right hose
reel.) Installed on rewind shaft of hose reel. (Stored in
hose reel cabinet.)
9
Hose Reel Rewind Button
Used to electrically rewind hose reels. (Use while
10
Static Reel
The static ground cable is pulled from static reel
and attached to unit being serviced and to a ground
plug, stud, or clamp. The static reel has an automatic
device that engages when cable is extended to
desired length and releases when cable is pulled out
again. The static reel is spring loaded to rewind
automatically.
11
Hose Reel Lock
Locks hose reel in position.
12
Rear Hose Reel
Stores and rewinds rear 1 1/4-inch hose.
13
Valve P
Permits fuel flow through front hose reel. (Valve is
open when handle is parallel to pipe.)
14
Hose Reel Rewind Button
Used to electrically rewind hose reels. (Use while
15
Hose Reel Lock
Turn hand wheel on hose reel clockwise to lock hose
reel in position. Turn hand wheel counterclockwise to
release hose reel lock.
2-7