TM 9-2330-398-10
2-17.
ENGINE OPERATING INSTRUCTIONS (continued).
d.
ENGINE OPERATION (High Temperature)
1.
Make sure nothing obstructs air flow to and from engine oil cooler (15) and cylinder cooling fins (16).
2.
Make sure all shrouds (14) are properly installed and in good condition.
e.
ENGINE OPERATION (Low Temperature)
1.
Make sure engine (1) has the proper oil and fuel for existing temperatures. For fuel specifications, refer to
2.
Keep batteries (17) fully charged.
NOTE
Entire cold weather starting procedure may not be required. The colder the temperature, the more
preheating and cranking will be required.
f.
COLD WEATHER STARTING
NOTE
When temperatures are below 30F (-1C), use this procedure to start engine.
1.
Pull out throttle (9) about halfway.
2.
Set preheater switch (12) to ON.
2-42