TM 9-2330-398-10
2-21.
FILTERED FUEL SERVICING OPERATIONS
(continued).
12.
WARNING
DO NOT let go of static reel grounding cable when rewinding until ball stop is firmly touching reel.
Failure to follow this warning may cause injury to personnel.
13.
Remove static reel grounding cable (1) from ground rod (3) or suitable ground.
14.
Cover and store fire extinguishers (2).
b.
FILTERED FUEL DISPENSING
NOTE
Use this procedure to dispense metered fuel from semi-trailer tank to vehicle. Fuel is pumped
through filter/separator, meter, and hose reel to vehicle.
1.
NOTE
Operation begins and ends with all valves closed.
2.
Make sure all valves are closed.
3.
Connect static reel grounding wire (16) to
vehicle.
4.
Remove fire extinguishers (2) and bring them to
point of operation.
5.
adjust engine speed to 1000-1200 rpm.
6.
Set valve E (4) to UNLOAD position.
7.
Pull emergency valve A control handle (8) to
OPEN position and open valves H and M (11
and 12) and either P (20) or R (15), depending
on which hose reel is to be used. If both hose
reels are to be used, open both valve P (20) and
valve R (1 5).
8.
Reset meter(s) (13) to zero by pushing in meter
reset knob(s) (14) and turning clockwise.
9.
Adjust engine throttle for desired flow rate (refer
10.
Release hose reel lock (17) on hose reel (19 or
22) to be used. Unwind hose (19 or 22).
11.
Insert nozzle (18 or 21) into vehicle being
serviced, and squeeze nozzle trigger to start
flow.
2-59