TM 9-2350-222-10-2
OPERATE HYDRAULIC SYSTEM (START HYDRAULIC SYSTEM)
Supplies:
Clean rags (item 56, App. D)
Make Sure:
SELECTOR VALVE lever (A) is in NEUT position.
Transmission shift lever (B) is set to P (park).
1. Unscrew and remove dipstick (C) from hydraulic oil reservoir (D).
2. Wipe oil from dipstick (C) with clean rag.
3. Push dipstick (C) all the way into oil reservoir (D) and remove
again.
4. Check oil level on dipstick (C).
a. If oil level is between FULL and ADD lines, oil level is ok.
b. If oil level is below ADD line, unscrew and remove filler cap
(E) and add oil (see LO 9-2350-222-12).
TA132389
5. Screw dipstick (C) into reservoir (D).
2-249