TM 9-2350-222-10-2
OPERATE MOLDBOARD (STOW MOLDBOARD IN EMERGENCY)
NOTE
If vehicle hydraulic system fails and moldboard
is not stowed, use the following procedure to
stow moldboard. This procedure requires at
least one crewmember stationed on the ground.
Crewmember will both assist and ground guide
the driver.
Tools:
Get pinch bar (A) from commanders station
Get 8 inch adjustable wrench (B) from right front fender box.
Make Sure:
1. Locate emergency lift cables (C) stowed behind
moldboard (D).
TA132403
2-263