TM 9-2350-222-10-2
OPERATE WINCH (PERFORM DIRECT WINCHING) - Continued
To Perform Two-Part Line Direct Pull Winching:
NOTE
Operating the winch requires three crewmembers:
Commander, Driver and outside Crewmember.
Tools and Supplies:
Get from right front fender box:
Two tow hooks (A)
Two tow pins (B)
Four locking pins (C)
Two pound hammer (D)
Get chain assembly (E) from front slope of hull.
Make Sure:
1. Locate snatch block (F) on left front side of turret.
TA132416
2-276