TM 9-2350-222-10-2
PREPARE FOR FIRING (REMOVE COVERS)
To Remove and Stow Main Gun Muzzle Cap:
Tools:
Get flat-tip screwdriver (A) from right front fender box.
Make Sure:
ELEV/TRAV POWER switch (B) is set to OFF.
1. Using screwdriver (A), loosen screw on clamp (C).
2. Grasp muzzle cap (D) by tabs (E).
3. Pull muzzle cap (D) and clamp (C) from end of main gun (F).
WARNING
Inspect gun tube for any obstruction. Firing the gun with
obstruction may cause damage to gun tube and possible injury to
personnel.
4. Stow muzzle cap (D) and clamp (C) in right front fender box.
5. Return screwdriver (A) to stowage.
TA132465
2-324