TM 9-2350-222-10-2
BORESIGHT WEAPONS (BORESIGHT 7.62-MM MACHINE GUN) - Continued
NOTE
Put left hand against rear of receiver (H) to keep
rod and bolt assembly (M) from falling from
weapon.
5. Pull back charger handle (N).
6. Release charger handle (N).
7. Pull out on mounting pin (P) and lift up on rear machine gun.
8. Slide rod and bolt assembly (M) from receiver (H) and remove.
9. Place machine gun back in mount and engage rear mounting pin
(P).
10. Using socket (A) and ratchet (B) with extension (C), loosen nut
(Q).
11. Tighten nut (Q) until it touches washer (R), then tighten an
additional 1/3 turn.
2-409