TM 9-2350-222-10-2
PERFORM POST-OPERATING PROCEDURES (INSTALL COVERS) - Continued
To Install Telescope Cover:
Tools and Equipment:
Get from right front fender box:
Flat-tip screwdriver (A)
Telescope cove r (B).
Make Sure:
ELEV/TRAV POWER switch (C) is set to OFF.
1. Using screwdriver (A), loosen screw (D).
2. Remove clamp (E) from housing (F).
3. Place cover (A) over housing (F).
4. Place clamp (E) on cover (B).
5. Tighten screw (D).
6. Return screwdriver to stowage.
Change 8
2-574