TM 9-2350-222-10-2
OPERATE UNDER UNUSUAL CONDITIONS (PERFORM SHALLOW WATER FORDING) - Continued
8.
Pull exhaust tube (G) from elbow (K). Put end of tube on
fender.
9.
Slide exhaust tube (G) back about 2 inches.
10.
Place two nuts, two screws, and four washers (H) in elbow (K)
and tighten.
11.
Using rag, clean inside surface of elbow (K).
12. Tighten two screws (E) to secure clamps (F) holding exhaust
tube (G) to fender.
TA252867
Change 1 2-666.1