TM 9-2350-222-10-2
OPERATE UNDER UNUSUAL CONDITIONS (PERFORM DEEP WATER FORDING) - Continued
23.
Set air intakes with screen end out to draw air from
24.
(Late model only) pull FORDING EXHAUST handle
(W) out to close and turn clockwise to lock generator
NOTE
To reach bulkhead plates (X) you may
have to traverse turret manually
To find access plates (Y) open hinged
turret platform access door (page 3-107).
Look through open door and traverse
turret (page 2479) until you see access
plates (Y) on hull floor. To reach all
screws, manually traverse turret as
necessary.
25.
Check that four bulkhead plates (X) and three turret
floor access plates (Y) are not loose or missing
screws. If loose, tighten using screwdriver and 9/16
26.
Change 8 2-668.7