TM 9-2350-222-10-2
OPERATE UNDER UNUSUAL CONDITIONS (PERFORM DEEP WATER FORDING)- Continued
Tactical Emergency Operations
NOTE
The following procedure is to be used if the machine
gun must be fired before water fording equipment and
materials are removed.
1.
NOTE
Turret ventilator blower motor seal should be removed.
If this cannot be done, loader's and commander's
hatches must be opened.
2.
Unscrew valve stem cap (A) from valve stem (B). Install valve
stem cap in valve stem (B), deflater end (C) down, and deflate
seal.
TA252914
Change 1 2-668.40