TM 9-2350-222-10-2
OPERATE UNDER UNUSUAL CONDITIONS (PERFORM DEEP WATER FORDING)- Continued
27.
Loosen two mounting screws and clamps (AW) holding personnel
heater exhaust tube (AX) to right front fender. Exhaust tube (AX)
will slide freely.
28.
Unscrew two nuts and screws and four washers (AY) from
exhaust tube clamp (AZ).
29.
Place exhaust tube (AX) on exhaust elbow (BA).
30.
Place two nuts and screws and four washers (AY) in clamp.
Screw clockwise until tight.
TA252926
Change 1 2-668.52