TM
9-2350-222-10-3
TROUBLESHOOTING - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE
1.
ENGINE DOES NOT CRANK WHEN STARTER SWITCH IS PRESSED
Step 1. Move shifting control lever from park to reverse and back to park.
Attempt to start vehicle, if vehicle does not start go to step 2.
WARNING
s
q Before performing step 2 set MASTER BATTERY
switch to OFF (to prevent accidental traversing of
turret).
q Remove all rings, jewelry and other metal objects
before checking batteries. Conducting electrical
charge through metal objects can cause serious
inury to personnel.
I
I
Lift battery terminal covers (A). Visually check to see if battery
Step 2.
terminals (B) and cables are corroded (C) or damaged.
a.
Clean terminals by wiping with a clean damp cloth.
b.
Apply a coating of grease (item 24, Appendix D), to terminals to
retard corrosion and then tighten terminals.
If cables or terminals are damaged, notify organizational
c.
maintenance.
TA252937