TM 9-2350-222-10-3
TROUBLESHOOTING - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
23. CALIBER .50 MACHINE GUN READY LAMP DOES NOT LIGHT -
Continued
step 3.
Check if ammo is loaded properly into last round stop switch (B) or
that last round stop switch (B) is depressed.
a.
If ammo is loaded properly or last round stop switch is depressed,
notify organizational maintenance.
b.
If ammo is not loaded properly, reload ammo box (page 2-318).
c.
If last round stop switch is not depressed, depress as necessary.
Step 4. Replace GUN READY indicator (C) lamp. Recheck operation of
GUN READY indicator, step 1 above.
a. If GUN READY indicator lights, discard defective lamp.
b. If GUN READY indicator does not light, notify organizational
maintenance.
TA252943
Change 1 3-36.1