TM 9-2350-222-10-3
TROUBLESHOOTING - continual
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
46. BOOM DOES NOT MOVE WHEN WINCH CONTROL LEVER IS PLACED IN
RAISE POSITION TO STOW THE BOOM
Step 1. Check selector control valve lever.
If in NEUTRAL or HULL position, place in TURRET position.
Step 2. Check to see if winch cable hook is attached to hook retaining eye
(A) on side of boom.
If it is not, attach to hook retaining eye.
Step 3. Check red buttons (B) on hydraulic oil filters (C).
If red buttons (B) are up, press down. If buttons will not stay down,
notify organizational maintenance.
Step 4. Check oil level on dipstick (D) from hydraulic oil reservoir (E).
Add oil if necessary (LO 9-2350-222-12).
TA132888