TM 9-2350-222-10-3
MAINTAIN TRACK (REMOVE END CONNECTOR) - Continued
7. Assemble hydraulic
end connector puller
and pump (L).
8. Place hook (V) of
hydraulic end connector
puller and pump (L)
on end connector (M).
9. Aline studs (W) with
track pins (U).
10. Pump handle (X) until
about 1 inch of track
pins (U) shows behind
end connectors (M).
11. Attach track fixture (F) of (H) to track pins (U). Using bar (G) or
ratchet (E), turn counterclockwise and tighten.
TA132897
3-67