TM 9-2350-222-10-3
MAINTAIN TRACK (CONNECT TRACK) - Continued
NOTE
If organizational mechanic is avail-
able, torque end connector and cen-
terguide bolts. Then go to step 26. If
organizational mechanic is not avail-
able, do steps 10 thru 25. Have organi-
zational mechanic torque bolts as soon
as possible.
10. Loosen centerguide bolt one turn.
11. Start engine (page 2-205).
12. Move vehicle until end connector is located at
point (L). Stop vehicle (page 2-213).
13. Move shift lever to P (park) (Page 2-215).
14. Push ENGINE FUEL SHUTOFF switch (M)
up. Hold until engine stops.
15. Set parking brake (page 2-213).
NOTE
Do not use extension bar to tighten
bolts.
16. Tighten inner and outer end connector bolts.
17. Start engine (page 2-205).
18. Move vehicle until end connector is located at point (N).
TA132911
3-81