TM 9-2350-222-10-3
MAINTAIN TRACK (ADJUST TRACK TENSION -
MECHANICAL)
NOTE
Track tension adjustments must be made
with vehicle on smooth, level ground.
-
Supplies:
Get a 10-foot-long string strong enough to hold weights such as two end
connectors or two centerguides.
1. Move vehicle backward at least two vehicle lengths.
2. Move vehicle forward and allow vehicle to coast to stop without
applying brakes.
3. Set shift lever to P (park) (page 2-215).
4. Shut off engine.
5. Remove dirt and mud from end connectors (A) to (B) near first (C)
and second (D) support rollers.
6. Tie weights (E) to each end of string (F).
NOTE
String must be placed over end connectors where it
will hang free just beyond support rollers (C) and (D).
7. Place string over center of end connectors (A) and (B).
TA249235
Change 2