TM 9-2350-222-10-3
PERFORM REFUELING (ISOLATE FUEL TANK) - Continued
25. Remove rag covers from exhaust pipe openings.
26. Place transmission shroud (AA) on hull supports (AH).
27. Using 3/4 inch socket and 1/2 inch drive ratchet, press six turnlocks
(Z) down and rotate toward hull to lock.
28. Place exhaust elbows (Y) and clamps (W) on exhaust pipes. Elbows
should be at 45 degree angle toward center rear of tank.
29. Close clamp clasps (X).
30. Using 7/16 inch open end wrench, tighten nuts (V) on clamp (W).
TA132958
3-128