TM 9-2350-222-10-3
MAINTAIN 7.62-MM MACHINE GUN (REPLACE BARREL
ASSEMBLY - M73) - Continued
To Install New Barrel:
1. Hold new barrel (F) so slot (P)
is up. Slide barrel (F) all the
way into jacket (M).
2.
Place left disconnector (Q)
through hole (R) in left side
of barrel jacket (M).
3.
Pull right disconnector ring
(L) back. At the same time,
swing receiver (K) up. Release
ring (L) so that disconnector
goes into hole on barrel
jacket (M).
WARNING
Be sure receiver is firmly in place before firing.
4.
Connect electrical lead (J)
to receiver (K).
5. Return asbestos mittens
to Stowage.
6. Return old gun barrel to
organizational maintenance.
TA132993