TM 9-2350-222-10-3
REPLACE INTERIOR LAMPS (REPLACE COMMANDER'S PANEL LAMPS)
Continued
7. Push new lamp (D) into lens
cap (B).
8.
Place seal (C) and
lens cap (B) in socket.
9.
Rotate lens cap (B)
clockwise until tight.
To Test Commander's Panel Lamps After Lamp Replacement:
Set CUPOLA POWER switch (A) to ON.
1.
POWER ON indicator (B) should light.
2.
Set LAST ROUND OVERRIDE switch (C) to ON.
3.
Set GUN SAFETY switch (D) to fire.
GUN READY indicator (E) should light.
4.
Set GUN SAFETY switch (D) to safe.
5. Set LAST ROUND OVERRIDE switch (C) to OFF.
6. Set CUPOLA POWER SWITCH (A) to OFF.
7. If either lamp failed to light, notify
organizational maintenance.
TA253004
3-312.2 Change 1