C4. TM 9-2350-230-12
TABLE 2-1.1. FUEL FILTER INSPECTION
STEP
PROCEDURE
REFERENCE
1
Completely drain fuel tanks to remove preservative, residual fuel,
2
Drain primary and secondary fuel filters
3
Remove primary fuel filter element and inspect for grease-like
substance.
CAUTION:
Avoid damaging shell gasket.
4
b. If grease-like substance is present, clean filter shell with
fuel or solvent and install new filter - 2940-745-7730.
5
Close all fuel drains and fill tanks with specified fuel
Par. 1-6c
REMOVAL PROCEDURE
1.
REMOVE BASIC ISSUE ITEM BOXES
SECURED TO SHPPING SADDLE.
2.
REMOVE TWO 2 SCREWS SECLUING
SADDLE TO AR INTAKE GRILLE.
3.
REMOVE TWO 2 SCREWS SECURING
SADDLE
TO
ILOCKS
ON
ENGINE
COMPARTMENT ACCESS COVER.
4.
REMOVE SADDLE AND REINSTALL SCREWS
ON ACCESS COVER.
5.
SECURE AIR INTAKE GRILLE (STEP 2) WITH
2
SCREWS
LOCATED
IN
DRIVER,S
COMPARTMENT.
6.
SECURE SCREWS REMOVED IN STEP 2 TO
SADDLE AND STORE.
7.
CHECK AND STOW SPARE PARTS AND
EQUIPMENT IN ACCORDANCE WITH BASIC
ISSUE ITEMS UST (A ENDIX 11).
Figure 2-2. (Superseded) Removal - basic issue (O.E.M.) items
2-3