TM 9-2350-230-12
TABLE 2-7. OPERATION OF TURRET - Continued
STEP
PROCEDURE
FIG/ITEM
ELECTRICAL OPERATION (STABILIZED MODE)
6B
Follow steps 6A through 8A above.
7B
Turn TURRET CONTROL STAB switch on. The indicator lamp will
illuminate.
8B
Continue squeezing gunner's control handle palm switch. Gun-
launcher will automatically remain parallel to initial line of
sight in elevation and azimuth while tracking vehicle is moving.
NOTE. Gunner must make corrections in elevation due to the
rise or fall of terrain and azimuth corrections due to vehicle
horizontal movement.
AFTER OPERATION
9
Turn TURRET CONTROL STAB and POWER switches off.
Indicator lamps will go out.
10
Secure turret traverse lock.
11
Perform after-operation preventive-maintenance checks and
services, table 4-1, steps 101 and 109 through 118).
(2-30.2 Blank) 2-30.1