TM 9-2350-230-12
TABLE 8-1. SPECIAL TOOLS AND EQUIPMENT
ITEM
IDENTIFYING
FIG.
NO
ITEM
NUMBER
REF.
USE
HULL, SUSPENSION, AND POWER PLANT
1
ADAPTER: brake spline
5120-906-1051
To adjust vehicle brakes.
(8355955)
2
ADAPTER: torsion bar puller
5120-901-6181
Used with PULLER 5120-313-
(10954004)
9496 to remove and install
No's. 2 and 3 torsion bars.
3
FIXTURE: track
4910-906-1053
Used to disconnect and
(10955739)
connect track.
4
GAGE: pressure kit
4910-572-8612
Used to check transmission
(8356176)
oil pressure.
5
GAGE: sprocket wear
5210-906-3706
Used to check sprocket
(10954023)
for wear.
6
HANDLE
5120-034-0884
Used with removers and
(10914196)
replacers.
7
INSTALLER: bearing cone
4910-906-1064
Used to install road wheel
(10954367)
arm spindle inner bearing
cone.
8
PIN: drift
5120-678-2795
Used to remove and install
(10861180)
track pin.
9
PUNCH
5120-910-3738
Used to remove road wheel
(10954017)
housing inner seal.
10
REGULATOR, accumulator
4910-766-3354
Check or recharge air box
charging
pressure.
11
REMOVER
5120-907-0696
Used to remove shock ab-
(10954000)
sorber; with screw removed,
use as torsion bar cover and
anchor cover wrench.
12
REPLACER: bearing
5120-906-1062
Used with handle 5120-034-
(10954006-1)
0884 to replace sprocket hub
inner bearing cup.
13
REPLACER: bearing cup
5120-906-1063
Used with handle 5120-034-
(10954006-2)
0884 to replace sprocket hub
outer bearing cup.
14
REPLACER: oil seal
5120-906-1057
Used with handle 5120-034-
(10954007-1)
0884 to replace idler hub oil
seal; road wheel arm support
housing outer oil seal; sprocket
hub outer oil seal.
82