C6, TM 9-2350-230-12
TABLE 8-17. PREVENTIVE-MAINTENANCE CHECKS AND SERVICES - CONTINUED
Sequence
Item to be inspected
No.
Procedure
Reference
ROAD TEST - Continued
68
Brakes
Accelerate vehicle to a moderate speed,
release accelerator and apply brake, ob-
serving if vehicle stops effectively without
pulling to one side. With the vehicle stopped
on an incline, depress brake pedal and apply
parking brake handle. Note if brakes lock
securely and vehicle is held in place. Re-
pair and adjust if necessary.
AFTER ROAD TEST
69
Road Wheels,
Check temperatures immediately after
Hubs, and Shock
road test. Refer to "AFTER OPERATION"
Absorbers
step 77.
70
Vehicle
Visually inspect all areas inside and out-
side vehicle for evidence of fuel or oil leaks.
70.1
Engine Mount
Tighten engine mount screws.
Screws
FINAL ROAD TEST
71
After all services and inspections have been
completed, take the vehicle on a short road
test to insure corrections of operational de-
ficiencies. Pay particular attention to those
items that were initially defective.
UNUSUAL CONDITIONS
Vehicles exposed to extreme-cold or hot
weather will require more frequent servicing.
Materiel subjected to salt-water immersion
should be evacuated to support maintenance
unit as soon as possible after exposure.
EXTREME-COLD WEATHER
72
Cooling System
Test radiator coolant for proper anti-freeze
protection.
73
Make sure all components are lubricated
App. IV
with correct grade of lubricant for expected
temperature.
8-84