Procedural Steps (Cont):
4. Install the R-123M onto the MT-1029, and tie down with rope or web sling.
5. Remove the outer cover on the female end of the UG-273 connector to make it a
male connector and insert it into the antenna connection point located on the right side
of the R-123M immediate y below the AHTEHHA sign. Attach the RF cable.
o Frequency must be set manually on the MX6707. If
possible use the auxiliary antenna.
o Use the four-conductor wire to hook up either a H-189
handset or a CVC helmet to the Soviet chest plate.