TM 9-2350-277-10
START ENGINE WITH OUTSIDE POWER SOURCE -- Continued
0022 00
WARNING
Electrical slave cable can be improperly connected causing electrical spark or fire. Personnel
can be killed or injured. Equipment can be damaged. Match connector guide lug and cable
prongs with receptacle hole.
4.
Connect slave cable to auxiliary power receptacle on disabled carrier.
5.
Connect slave cable to auxiliary power receptacle on source carrier.
6.
Start engine of source carrier. See task: START ENGINE, (WP 0021 00).
7.
Run engine on source carrier at a fast idle (1000 rpm) for 5-10 minutes to show charging on BATT GEN indicator.
NOTE
In cold weather areas, air box heater can be switched on to heat engine on disabled carrier
before attempting to start it.
8.
Start engine on disabled carrier. See task: START ENGINE, (WP 0021 00).
Change 1
0022 00-4