TM 9-2350-277-10
INSTALL/REMOVE AN/VVS-2(V)1A DRIVER'S NIGHT VISION (ALL EXCEPT M58) -- Continued
0034 00
4.
Stow excess cable behind fixed fire extinguisher tubing.
5.
Rotate driver's night vision to straight-ahead (detent) position.
6.
Hold driver's night vision firmly, while loosening two viewer handles, slide rear cleat back.
REAR
CLEAT
REAR
FORWARD
CLEAT
CLEATS
VIEWER
HANDLE
HANDLES
7.
Tilt the eyepiece end forward and carefully lower driver's night vision.
8.
Carefully wipe off any dirt or moisture from driver's night vision.
9.
Remove strap assembly, plug, stowage cover, and entrance window cover from stowage bracket.
10. Install driver's vision in stowage bracket and secure with strap assembly stowage cover and entrance window cover.
11. Install plug assembly in vision adapter mount and secure with rear cleat and two viewer handles.
ENTRANCE WINDOW
COVER
DRIVER'S NIGHT
VISION
STRAP
ASSEMBLY
STOWAGE
BRACKET
STOWAGE
COVER
END OF TASK
0034 00-6
Change 3