TM 9-2350-277-10
OPERATE AN/VAS-5 DRIVER'S VISION ENHANCER (DVE) (M58 ONLY) -- Continued
0035 02
NOTE
For all controls and indicators identified in this section, refer to Description and Use of
Before applying power to unit, ensure that the following control positions are as indicated in
the following steps.
Before operating the vehicle, ensure that the DVE azimuth and elevation controls are positioned
in the locked straight-ahead and level 0 degree detent viewing positions. This will ensure that
the driver is looking straight ahead when operating the vehicle.
Drive ONLY in the straight-ahead and level 0 degree detent viewing position.
2.
Unstow the driver's/commander's display as required, by pulling display adjustment knobs out and positioning display
in the viewing position.
Ensure azimuth and elevation controls are in straight-ahead and level 0 degree detent position. Ensure that the Azimuth
3.
Locking Knob is locked, securing the swivel plate in place.
0035 02-2
Change 4