TM 9-2590-209-14&P
c. Remove gasket (3) from adapter assembly (5).
4-9. Inspection. Inspect assemblies/parts for wear
and/or damage. If repair is required, continue with the
d. Remove pin (4) from adapter assembly (5).
following procedures.
e. Remove rivet (9) securing nut (7), and remove
nut and two rings (8).
a. Turn adapter assembly with base down.
f. Remove pin (6) from adapter assembly (5).
b. Remove seven contacts (1) and insert (2) from
adapter assembly (5).
Figure 4-3. Disassembly or assembly of headlamp adapter.
1 - Contact (7)
6 - Pin
11 - Clip
16 - Grommet
2 - Insert
7 - Nut
12 - Rod
17 - Rod
3 - Gasket
8 - Ring (2)
13 - Grommet
18 - Insert
4 - Pin
9 - Rivet
14 - Marker (7)
19 - Connector (7)
5 - Adapter assy.
10. - Screw
15 - Cable
4-7