TM 9-2590-209-14&P
Figure 10-8. Removal or installation of headlamp adapter (early model bulldozer).
e.
'(7) Assemble gasket (6), ring (3), nut (4),
rivet (20), and holder (5) on adapter, and secure with
three screws (1), washers (2), lockwashers (8), and nuts
(1) Install grommet (18) and rods (16) and
(9).
(19) in cable (17).
(8) Install insert (11) and seven pins (21).
(2) Install cable into adapter (7).
f.
(3) Install gasket (6) on adapter.
(4) Place base (13) on gasket and
(1) Connect
adapter
assembly
to
adapter, and secure with three screws (1), washers (2),
headlamp mount.
(2) Connect
headlamp
to
adapter
(5) Install gasket (12), insert (11), and
assembly.
seven contacts (10) into cable (17).
(6) Invert the adapter assembly.
10-16