TM 9-2590-209-14&P
Figure 10-23. Removal or installation of carrying hooks and shafts (sheet 2 of 2).
Table 10-4. Troubleshooting (Early Model Bulldozer)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
MECHANICAL CLUTCH CONTROL
ERRATIC BLADE ASSEMBLY MOVEMENT
Step 1. Determine if mechanical clutch is out of adjustment.
Step 2. Determine if mechanical clutch control linkage is binding, distorted, or damaged.
Lubricate control linkage with a light coat of GAA grease. Repair or replace all damaged or distorted parts of
control linkage.
10-44