E-32. Clutch Support and Yoke Assembly.
E-28. Headlight Assemblies.
E-29. Removal and Installation .
Refer to
figure E-
for removal and installation instructions. Follow the
11 for removal and instructions. Follow the alphabetical
alphabetical sequence of f views for removal and the
sequence views for removal and the numerical
numerical sequence of views for installation.
sequence of views for installation.
E-34. Clutch Control Assembly.
E-30. Power Take-Off Assembly.
E-31. Removal and Installation .
The hydraulic
for removal and installation instructions. Follow the
pump and power take off assembly group includes the
alphabetical sequence of views for removal and the
sprocket assembly, and the hydraulic pump and mount
numerical sequence of views for installation.
assembly. The hydraulic pump and mount assembly is
composed of the right angle drive, clutch assembly and
E-36. Adjustment
the hydraulic pump assembly mounted on a common
a. General. The clutch is a dry, multiple disk-type
mount. The hydraulic pump and mount assembly may
clutch The tighter the disks are when engaged, the more
be removed as unit. However since tilting of the unit is
torque is transmitted to drive the hydraulic pump. The
required to lift it from the power plant compartment,
pump requires a constant torque input in ratio to engine
prior removal the pump and clutch assemblies is
drive peed. When the disks wear, they become loose
recommended to reduce weight. Refer to figures and
and the necessary power transmission is lost, and clutch
E-12 and E-13 for removal and installation of
the
adjustment is required. Erratic performance of the
complete group. Follow the alphabetical sequence of
moldboard is an indication of need for clutch
views for removal and the numerical sequence of views
adjustment.
for installation.
AE-14