TM 9-2590-506-13&P
2-6.
PREPARATION FOR USE (Continued).
d.
Place converter assembly ( ) on a clean, flat
3
surface.
2-7.
OPENING THE TANK. Open the tank and
install the converter assembly as follows:
a.
Remove cover from tank manhole.
b.
Carefully insert converter assembly (1) into tank
opening (2).
c.
Rotate latch le vers (3) counter-clockwise making
sure locking latches (4) are engaged.
d.
Lift levers (3) up and towards outside of
converter assembly (1) to the LOCK position.
2-11