Table 3-1. Troubleshooting (Continued)
TEST OR INSPECTION
ELECTRICAL RECEPTACLE WILL NOT ACCEPT ELECTRICAL PLUG.
Check that plug which mates with electrical receptacle has a 7-pin connector.
If plug and receptacle do not mate, obtain correct plug or use an adapter.
Check that electrical receptacle (1) is clean and free of foreign matter.
a. Clean electrical receptacle. If clean, inspect to determine if defective.
b. Check that operation of hinged cover (2) does not interfere with electrical plug.
c. Request direct support maintenance repair electrical receptacle.
10. FUEL OR AIR LEAKS (CLASS II OR III) OBSERVED DURING FUELING OF TANK.
Check around areas indicated by arrows, observing and listening for leaks during tank fueling operation.
If Class I leak detected, monitor area during tank fueling operation.
If leak detected, notify direct support maintenance.